Full Automatic Bottle Blowing Machine
MACHINE FEATURES:
1. Advanced PLC control system, stable in performance, automatic preform feeding .
2. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater
3. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
4. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
5. No contamination and low noise with the air cylinder to drive the action instead of the oil pump. 6. Air route design is divide into two parts ,
7. Ideal effect of the chilling with the chilling system
8. Low rejection rate: less than 0.3percent
MAIN TECHNICAL PARAMETERS:
ITEM | UNIT | HY-A4 | |
Machine | Clamping force | Kn | 2000 |
Clamping stroke | mm | 230 | |
Stretching stroke | mm | 370 | |
Bottom stroke | mm | 70 | |
Number of cavities | Cavity | 4 | |
Container | Max. container volume | ltr | 2.0L |
Neck diameter | mm | 28MM, 30MM ,38MM,48MM | |
Max .container diameter | mm | 200 | |
Max. container height | mm | 330 | |
Theoretical output | bph | 3200-4000 | |
Electrical System | Total power | KW | 30 |
Heating power | KW | 28 | |
Power supply | 380V/50HZ | ||
Power consumption | KW/H | 18(0.5L) | |
Air system | Operating pressure | Mpa | 0.8 |
Low pressure consumption | L/min | 1000(0.5L) | |
Blowing pressure | Mpa | 3.0 | |
High pressure consumption | L/min | 2000(0.5L) | |
Machine size | Main machine(L×W×H) | cm | 350*170*180 |
Preform auto-loader | cm | 115*95*185 | |
Machine weight | Kg | 2500 |
HY-A4 new Full automatic PET bottle blowing machine