HKT variable pump drive injection molding machine is precision and energy-saving series by GuangSu, assumers perfect combination of GuangSu state-of-the-art machine processing together with internationally advanced variable pump control technology.This type of injection molding machine adopt high responsive proportional variable pump system thus to enable the high mach of power between hydraulic output and machine effective operation which avoids energy loss from high pressure throttle flow. Compared with normal constant pump drive machine, the variable pump drive machine is able to save electric power consumption by 30% up to 50%.In addition, the machine less heating enables save of cooling water by 30%, debasing peripheral noise and extension of service life of hydraulic sealing parts and oil to minimize operation and maintenance cost and meanwhile to meet the strict international environment protective policy.HKT Series variable pump drive injection molding machine is sure to bring for customers incomparable cost efficiency advantages.The key advantages of HKT series plastic injection machine:Save of energyHigh speed system response and short molding cycleLargely decrease system oil temperatureReduce mold open and close crash to extend service time of machine and mold tool.To extend service life of oil piping system, to reduce maintenance possibilities and save maintenance cost.Higher requirement for hydraulic oil; provides with imported high quality oil strainer.
HKT-110T Injection Moulding Machine | ||||
International Model | 370/110 | |||
Injection Unit | A | B | C | |
Theoretical Injection Volume | cm3 | 163 | 192 | 235 |
Injection Weight(PS) | G | 148 | 175 | 213 |
OZ | 5.2 | 6.2 | 7.5 | |
Screw Diameter | mm | 35 | 38 | 42 |
Max.Injection Pressure | mpa | 228 | 193 | 158 |
Screw Length and Diameter Ratio | 20:1 | 20:1 | 18:1 | |
Screw Stroke | mm | 170 | ||
Screw Speed Rotation | r/min | 0-180 | ||
Clamping Unit | ||||
Clamping Force | kn | 1100 | ||
Max.Opening | mm | 350 | ||
Template Size | mm×mm | 600X550 | ||
Distance Between Tie Bars | mm×mm | 405X370 | ||
Mold Thickness(Min.-Max) | mm | 150-380 | ||
Max Mould Size | mm | 730 | ||
Piston Rod Stroke | mm | 100 | ||
Hydraulic Pressure | kn | 42 | ||
Power&Heater | ||||
Hydraulic Pressure | mpa | 17.5 | ||
Hydraulic Motor Power | kw | 11 | ||
Heater Power | kw | 7.5 | ||
Space of Temperature Control | \ | 4+Nozzle | ||
Others | ||||
Cycle Time | Sec | 1.3 | ||
Hydraulic Box Capacity | L | 200 | ||
Size | m×m×m | 4.3X1.2X1.8 | ||
Weight | kg | 4200 |
Configurations for Standard series: | |||
Name | Brand | Producing area | |
Ratio Variable Pump | Push | China | |
Oil Hydraulic Motor | Intermot | Italy Joint Venture | |
Direction Valve | Vickers | U.S. | |
Controller | Mirle 6117 | Taiwan | |
Automatic Switch | Schneider | France | |
Thermorelay Proximity Switch | Schneider | France | |
A.C. Contactor | Schneider | France | |
Position Switches | Schneider | France | |
Electronic Ruler | Novo | Germany | |
Single&Twin-stage | ABB | China | |
Sealing Element | Hallite | Britain | |
Piezometer | DMASS | Germany | |
Lubricant Pump | Herg | China Japan Joint Venture |
Injection Moulding Machine