High-Speed One-for-Four PVC pipe production line 1.power loss:90 degree 2.without noise pollution 3.cut with chipless

High-Speed One-for-Four PVC pipe production lin(third generation)

comparison of main parameters between traditional One-for-Two pipe production line and KANGHAO One-for-Four pipe production line.

1.production capacity: with guaranteed product quality, one-for-two pipe production line has the daily output of 3 tons, while KANGHAO one-for-four pipe production line has the daily output of 5-7tons, which is two times of the traditional one.

2.power loss: the traditional one-for two pipe production line's power consumption is about 200 KwH, while KANGHAO's power consumption is about 90 KwH.

3.water and gas consumption:KANGHAO: the optomized vacuum cooling system and cutting feeding air channel greatly reduce the water consumption by more than 75%.

4.occupancy area: thank to KANGHAO integration design, KANGHAO one-for-four pipe production line saves the space by one-fold than the traditional one-for-two pipe production line.

5.Human resources:two prodution lines need two operators on average respectively, and in other words, KANGHAO saves half of operators than the tradition one-for-two pipe production line.

6.Noise pollution: the traditional one causes harsh sound when cutting, while KANGHAO causes almost no noise because of adopting chip-free cutting technology.

7.Dust pollution: the tradtional one causes serious saw dust pollution and material waste due to the cutting blade, while KANGHAO causes almost no dust contamination for its chip-free cutting technology.

Pipe diameter wall thickness specification:

Pipe diameter	Wall thickness specification
16mm	16mm×1.5mm	16mm×1.25mm	16mm×1mm
20mm	20mm×1.75mm	20mm×1.5mm	20mm×1.25mm
25mm	25mm×2mm	25mm×1.5mm	25mm×1.25mm
32mm

High-Speed One-for-Four PVC pipe production line