Pu high pressure foaming machine uses gas pressure colliding hybrid, the gun head self-cleaning washing..

GZ ( Y ) - 20 # high-voltage field repair foaming machine

Total power 12KW, rated power of 6KW, if no external power, should be with 380V, 20KW generation set 1 ( owned )

Timing discharging system: ( 99.9 seconds ) with intelligent digital display time relay. By selecting switch can realize the timing of discharge, but the two control discharging.

Automatic heating system: 3KW heater 2. Using intelligent digital temperature controller drives the heater, to achieve temperature control purposes.

Protection system:

Material, road protection system : the use of high and low pressure switching valve and electric contact pressure gauge is used to feed pump output pressure overpressure, protect its feed pump and pipe is not damaged, the alarm and the reset switch.

II, circuit protection system: the use of isolation transformer and 24V DC power supply control, short circuit and overload protection.

To configure.

First, 3KW motor 2.

II, 10ml / r high pressure plunger pump 2, raw material ratio and flow rate can be regulated freely.

The 50L tank, with two tank integrated full use of space to achieve portability.

II, self-cleaning type high pressure gun head 1 (" Xu di ." ).

The high pressure discharge pipe 15 meters, 2 ( four made in Shenyang. )

The 15 meters 2 root, trachea

Sadly, pump 1 ( owned ) ( 0.8Mpa 0.3-0.6 cubic meters per minute ).

Panel 1, configuration, Zhengtai Delixi electrical.

With a low pressure circulation filtration apparatus.

Dimensions: length * width * height ( 1000 mm x 700 mm x 1300 mm )

The whole machine weight: 120kg

Pu high pressure foaming machine ( filling machine )