1.Anti-aging resin, longer duration of use. 2.Strong UV protection. 3.High light transmittance. 4.Good corrosion resistance

Glass Fiber	Unit Weight	Anti- ultraviolet Rate	Tensile Strength	Flexural Strength	Cracking Elongation Rate
Adopting Taian high- quality glass fiber the content no less than 30%	1800g/m²  2400g/m²  3050g/m²	99.9%	100Mpa	180Mpa	1.9%
Nominal Thickness	Heat Resistance Limit	Light Transmittance	Pasture Hardness	Thermal Expansion Coefficient	Thermal Conductivity
1.2mm   1.5mm   2.0mm	-60 to +130	75%±2% ( light green) 53%±2% (cream white)	≥50	2.2×10¯5cm/cm	0.18w/m° k
Warranty
15 years

Reinforced Bending Line: Having anti-pull reinforced with longitudinal uniform distribution (It depends on consumers to choose voluntarily whether adding)

 The Technical Standard of High-quality FRP

1.Good tenacity. No cracking phenomenon when driving nails in roof installation

2.Having close combining with color steel plate. Cross- section thickness is uniform. The shape of  FRP is consistent with steel plate.

3.Transmittance loss rate is low. No yellowing phenomenon after long term service.

4 Thermal expansion coefficient is close to that of steel plate. No cracking and water leakage in nail driving place because of expand with heat and contract with cold.

5.Light through FRP assumes scattering shape and gentle.

6.Bright and clean appearance, no distinct air bubble and cracking on FRP.

7.Anti- ultraviolet and anti- chemistry corrosion.

8.Anti- ageing and anti- pulverization.

9.Long service life.

frp translucent roofing sheets