ptfe rod filled graphite /carbon/bronze 1.diameter:5~300mm 2.make as ISO9001:2008standard 3.for sealing,lubricant

ptfe rod filled graphite /carbon/bronze1.Characteristics: Two kinds of ptfe rods: extrusion and molding pressure. Diameter from 4 to 100mm is made by ram extruding method with ptfe granular resin; rods over the diameter 110mm are manufactured by molding, and then sinter them. 

2.Appearance : It is homogeneous in structure, smooth surface, not permitting the crack, air bubble, flatted, mechanical damage and so on. 

3.Application: It is used to make bearing strip, sealing, lubricant, non-stick parts and electric insulation parts of all sorts of frequency.

4.Main Technical data:

Item	Density	Tensile strength	Tear elongation
Unit	g/cm3	Mpa	%
Target	2.10~2.30	≥14.0	≥140

 Specifications:

Item	Diameter (mm)	Length (mm)
Extrusion rod	4~10	1m,2m…or as clients’requests
	12~50
	50~100
Molding rod	7~10	100
	15~25	100~150
	30~200	100~1000
	200~250

ptfe rod filled graphite /carbon/bronze