PTFE Round Bar 1.Specifications: 2.Density: 2.1-2.3g/CBM 3.Temp resist: 260 - (-180) degrees celsius,not aging

PTFE Extruded Round Bars

Diameter from 1mm to 150mmBoth virgin grade and recycle grade

There are three kinds of PTFE rods to offer.One is manufactured by paste extruding method in the diameter from 2 to 4mm and the other is made by ram extruding method in the diameter from 5 to 120mm;rods over the diameter 55 to 300mm are manufactured by moulding . PTFE is the most chemical-resistant and the best dielectric of all known plastics.It is not aging and binding.It can be used from-180°C~+260°C under no burthen circumstances .PTFE has the lowest coefficient of friction of all known solid material

Specification

Types	Diameter(mm)	Length(mm)
pressed rod	2~4	produced under requirements
extruded rod	5~120	500~3000
die pressed rod	25~300	100~300

 

Main properties:

Properties	unit	Result
Apparent density	g/cm 3	2.10~2.30
Tensile strength(min)	MPa	14.0
Crack elongation(min)	%	140

 

Application

Electrical insulation,seal,anti-sticking materials

Pipe Sealing PTFE