ptfe Extruded rod 1.can be made content percentage of recycle PTFE products according needs. 2.MOQ: 50pcs offer anysize

 

PTFE Extruded  rodcan be made content percentage of recycle PTFE products according requestion 

Properties:

1.Working temperature:-180~+260°C

2.Melting point:327°C

3.Yield strength: 23MPa

4.Density: 2220 kg/m3

5.Coefficient of friction<0.10

6.Strong chemical-resistant

 

 

PTFE extruded rod 

diameter:5~200mm

length:1~5m

density:2.3g/cm3 

virgin, recycled, filled ptfe moulded rod are vailable

size according to customers' need

Property	Unit	Target value
specific gravity	--	2.1~2.3
Tensile strength (min)	MPa	≥14.0
Elongation at rupture	%	≥140

PTFE moulde rod

diameter: 6~330mm

length: <=200mm

density:2.3g/cm3

virgin, recycled, filled ptfe moulded rod are vailable

size according to customers' need

Property	Unit	Target value
specific gravity	--	2.1~2.3
Tensile strength (min)	MPa	≥14.0
Elongation at rupture	%	≥140

virgin, recycled, filled ptfe moulded rod are vailable

size according to customers' need

 

PTFE

Virgin, or unfilled, PTFE is widely used due to it's unique combination of properties:

Characteristics:Outstanding chemical resistance (unmatched by any other plastic)lowest coefficient of friction of any plasticsuperb electrical insulatorhigh resistance to weatheringwide working temperature range (-180C to +260C)

Typical applications:SeatsSealsInsulatorsSleeves and LinersBellows bridge and pipe bearings

Properties (typical):Colour:  WhiteDensity: 2.22 g/cm3

 

we offer above products

PTFE  moulded /skived sheet

PTFE skived film/tape

PTFE moulded/extruded rod

PTFE moulded/extruded tube

PTFE  extruded capillary tube

PTFE gasket sealing material

Filled PTFE products

PTFE component

our Production equipment

Molding machine,

Sintering furnace,

Turning machine,

Directional machine

PTFE Extruded rod