PTFE Extruded Rods - Diameter from 1mm to 150mm Both virgin and recycle grade Brand: Mainflon Origin: China Material: PTFE

There are three kinds of PTFE rods to offer.One is manufactured by paste extruding method in the diameter from 2 to 4mm and the other is made by ram extruding method in the diameter from 5 to 120mm;rods over the diameter 55 to 300mm are manufactured by moulding . PTFE is the most chemical-resistant and the best dielectric of all known plastics.It is not aging and binding.It can be used from-180°C~+260°C under no burthen circumstances .PTFE has the lowest coefficient of friction of all known solid material

PTFE Rod Specification

Types	Diameter(mm)	Length(mm)
ptfe pressed rod	2~4	produced under requirements
ptfe extruded rod	5~120	500~3000
ptfe die pressed rod	25~300	100~300

PTFE Rods Main properties:

Properties	unit	Result
Apparent density	g/cm 3	2.10~2.30
Tensile strength(min)	MPa	14.0
Crack elongation(min)	%	140

 

 Application 

Electrical insulation,seal,anti-sticking materials

 

 

P.T.F.E. Rods