1.Can be adapted on site to the exact length of the construction joint 2.Serrated surface 3.Permanent seal after injection

Advantages:

 

1.can be adapted on site to the exact length of the construction joint(recommended maximum length is 5 metres)

2.serrated surface3.permanent seal after injection

4.injection can be performed at any chosen time

5.the system allows injection under relatively low pressure

6.when injection tube is injected the pressure of dispersion of the resin remains uniform over the full length of the tube

 

Field of application:

 

Sealing of cold and construction joints, pipe penetrations, joints between slurry walls and slabs through post-injection of the tube with LW injection resins

 

Technology data:

 

property	Value
Outside diameter	10mm, 12mm, 30mm
Inside diameter	8mm
Maximum length	6m
Operating temperature	Up to 70°C

 

Apperance:

 

Yellow spiral shaped injection tube, porous its entir length, with an outside diameter of 12mm

1. A reinforced spiral of steel wire

2. A non-woven filtrating membrane

3. Outer synthetic membrane

 

Packaging:

 

Length: 5x10m lengths( recommended maximum length is 5m)

Blue or white trumpets: 40pieces , caps:40pcs

( can also be ordered seperately)

 

Weight:

Gross:4.18kg/30m Net: 3.8kg/30m

Grout Tube for Injection Resins