1.Temperature scope:-70~110C 2. Low flow ressistance:smooth inner 3. OEM accept 4. Long lifetime 5. Facotry supply

Item				Technical Specifications
Lengthways Recovery Ratio (120°C, 1 hour)				≤3%
Degree of Cross Linking (%)				≥65
Pressure that can be used				12.5kgf/cm²(bar)
Sustained Hydraulic Pressure	Hydrostatic Tension(Mpa)	Test Temperature	Time on Test
	12Mpa	20°C	1h	No leackage, No broken
	4.8Mpa	95°C	1h	No leackage, No broken
	4.7Mpa	95°C	22h	No leackage, No broken
	4.4Mpa	95°C	165h	No leackage, No broken

PE-Xb (cross-link) : 

Crosslinked polyethylene pipes adopts HDPE as main naterial, chemical covalent bonds formed in polyethylene molecular chains through Crosslinking making molecules forming three dimensional net structure, and with degree of crosslinking ≥65%, used for the transportation of cold and hot water.

PEX pipes are produced and tested according to International Standards EN ISO 15875 and DIN 16892-93. They present most excellent thermic properties, chemical resistance, low friction coefficient and minimum pressure losses. Also they are non toxic and noiseless.

Features:

                                   

1. Yieldingness 

2. Never rusting                                            

3. Long service life of 50 years

4. Shock resistance, antifraying                            

5. Environmental Performance              

6. Energy conservation reduction losses

7. Low coefficient of thermal conductivity                   

8. Wall of pipe smooth and little resistance

9. High-impact strength, Never breed bacteria              

10. Not fragile, fixing briefness, steady capability

11. High and low temperature resistant,can be used under -70°c-110°c 

 Can be used at: 

1. Low-temperature hot water floor radiant heating piping system

2. Solar water heater most suitable pipe                     

3. Radiator pipe system

4. Hot and cold water piping system

Pex-b pipe for water supply and floor heating system, pex-b, plastic pipes for water