Product: PAP pipe
Material: Virgin Random Polypropylene
Sizes: 20mm to160mm
Pressure Rating: 1.25MPa, 1.6MPa, 2.0MPa ,2.5MPa
Colors: light grey, white or other colors on request
Connection: socket fusion joint, electro fusion joint or transition joint
Products Advantages:
1. High Temperature Resistance: the maximum sustained working temperature is up to 70 Degrees Celsius, the maximum transient temperature is up to 95 Degrees Celsius
2. Heat Preservation: low thermal conductivity which is only 1/1500 of brass pipe, and 1/250 of steel pipe
3. Non-toxic: no heavy metal additives, would not be covered with dirt or contaminated by bacterium
4. Corrosion Resistant: resist chemical matters or electron chemical corrosion
5. Lower Installation Costs: light weight and ease of installation can reduce installation costs by as much as 50% over metal piping system
6. Higher Flow Capacity: smooth interior walls result in lower pressure loss and higher volume than metal pipes
7. Long Life: more than 50 years under normal conditions
8. Recycled and Environment-friendly.
Product Application:
1: Domestic and living cold and hot water supply.
2: Heating pipe for heating installation on floor and wall, snow-melting devices for buildings in northern, park, air port, and so on
3: Used for solar energy water heater.
4: Coal gas and natural gas pipe
5: Used for reclaimed water project
6: Piped used for central air conditioner
7: Used for oil transportation, cooling fluid.
8: Used for sleeve of wire or cable
9: Used for oxygen input in hospital.
10. For gas suction under condition of vacuum
11. Edible fluid transportation piping system.
PPR pipe and fittings