Ads by Google
GIGA Film faced plywood
GIGA film faced plywood is suitable for outside high-end and high-rise construction and bridge construction.It’s large breadth make it able to reduce the quantity of seam and improve the working efficiency of membrane. Good water resistance,strength properties, high turnover times, long service life, easy mold release by only taking the time 1/7 of the steel mould ,no secondary wall plastering process, being able to directly cover the surface decoration, shortening the process time by 30%. It’s advantageous to winter construction for the excellent heat preservation performance.
1,The weight is light: Is suitable for the high-rise construction and the bridge construction.
2,The width is big: The maximum width for 2440×1220mm, reduces the joint quantity, raises the mold working efficiency. 3, Does not warp, does not distort, does not crack, the water resistant performance to be good, the turnover number of times is high, the service life is long. 4,The drawing of patterns is easy, is only the steel die 1/7. 5, Makes the clear water concretes: Construction thing surface smooth artistic, subtracts the wall two plastering crafts, but the direct cover decoration, reduces time 30%.6, Anti-corrosive: Does not pollute the concretes surface.7,The heat preservation performance is good, is advantageous to the winter construction. 8, May do changes the tune plane the template.
Size: 915x1830mm.1220x2440mm
Thickness: 12mm,13mm,13.5mm,14mm,15mm,16mm,17mm,18mm
Glue: WBP and Melamin
Core: Polar
Package
Technical Specification: 18mm full poplar film faced plywood
No. | Property | Unit | Test Method | Value of Test | Result | |
1 | Moisture content | % | EN 322 | 6-12 | Check out | |
2 | Density | Kg/m3 | EN323 | 530 | Check out | |
3 |
Bonding quality | Bonding quality | Mpa | EN314 | Max: 1.40 Min: 0.75 |
Check out |
Damage rate | % |
| 54% | |||
4 | Bending Modules of Elasticty | Longitudinal |
Mpa |
EN310 | 4180 |
Check out |
Lateral | 4578 | |||||
5 | Bending Strength N/mm | Longitudinal |
Mpa | 40.25 |
Check out | |
|
| |||||
How to cut best
Always clean and repair the formwork panels before storage. The formwork should then be stacked off the ground on level supports and under cover. Framed formwork panels should be stacked alternately face and back to back to avoid face damages by bolts etc. If panels are wet, do not allow them to dry too rapidly.Sealing of edges
Phenolic fabric film faced plywood edges are fully sealed at the factory and it is the most important that all edges remain sealed. To obtain full value from a phenolic fabric film faced sheet any recut edges should sealed as soon as possible with water proof paint.Cleaning and repair
To obtain full life, cleaning should be carried out immediately after each use. Phenolic fabric film faced plywood may be wiped with release agent or cleaned with water and stiffbrush .
GIGA Film faced plywood