Welcome to ECVERY
outerdoor use marine plywood
outerdoor use marine plywood
Supplier Info
[China Supplier]
Contact Person : Ms. song rainbow
Tel : 86-539-8598632
Fax : 86-539-8598632
Product Detail
outerdoor use marine plywood core: hardwood glue:wbp/melamine waterproof

outerdoor use marine plywood or waterproof plywood or film faced plywood

1.  

     data                                             specification
size1220x2440,1250x2500 or as requested
thicknessdifferent thickness abailable, from 4mm to 21mm
corepoplar, birch, hardwood, combined or requested by client
gluemr/melamine wbp /phenolic glue
filmblack/brown/red chinese film or dynea film
gradeA/A grade or requested
packing

inner with plastic bag, outerside with 3plywood/carton, then fasten with 3x6 iron sheet, then packed with pallets.

application                                                                       concrete forming for construction

note: the above data is only for your reference and this would not offer you any guarrantee because the actual repeteation times of the panels also is influenced by other factors such as different using methods and storage etc.

2.  specification

thickness(mm)layersstandard size large size 
  min. (mm)max.(mm)min.(mm)max.(mm)
978.59.58.29.5
12811.512.511.212.5
159-1014.515.514.215.5
181117.518.517.218.5
211320.221.520.221.5

3. moisture (8-14% & density:

          products        weight (kgs/m3)
birchabout 700kgs/m3
combined500-700kgs/m3
poplarabout 510kgs/m3

4. conserve and maintain:

how to cut the the best from our film faced plywood?

storage:

always clean and repair the formwork panels before storage, the formwork should then be stacked off the ground on level supports and under cover. framed formwork panels should be stacked alternately face and bac to back to avoid face damage by bolts etc. if panels are wet, do not allow them to dry too rapidly.

sealing of edges:

phenolic film faced plywood edges are fully sealed by the factory and it is the most important that all edges remain sealed. to obtain full value from a phenolic film faced plywood sheet any recut edges should sealed as soon as possible with water proof paint sealing of holes.

any hole made in film faced formwork panels should also be sealed to prevent water entering. if water does enter it may cause swelling around the holes.

cleaning and repair:

to obtain full life, cleaning should be carried out immediately after each use. phenolic film faced plywood may be wiped with release agent or cleaned with water and stiffbrush. it may be necessary to use a hard wood scraper but care should be taken not to damage the plywood face. do no use a wire brush or sharp metal scraper to dislodge hardened concrete.

outerdoor use marine plywood

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.