Welcome to ECVERY
cpp for ink
cpp for ink
Supplier Info
[China Supplier]
Contact Person : Ms. liang Julia
Tel : 86-830-2288485
Fax : 86-830-6667090
Product Detail
Chlorinated Polypropylene (CPP) is a thermoplastic resin widely used in the fields of ink, painting and adhesives.

CPP belongs to thermoplastic resins. It has strong adhesion to polypropylene (PP) as well as polyethylene, paper and aluminum film, etc. So it is widely used in the fields of ink, painting and adhesives and its main usages are as follows.

CPP can be used as an effective binder in the manufacturing of composite ink for the films of BOPP, OPP, PET, PE, etc.CPP can be used as a composite adhesive between paper and films of BOPP, OPP, PET, PE, AL, etc., and an inner coating for pressure-sensitive adhesive tape of BOPP films.With its good film-forming and glossiness properties and its strong affinity with pigment, CPP can be used as colorant for plastic modification or as paint binder for polypropylene (PP) injection molding waresUsing methods

The service performance of CPP is relative to the indexes of chlorinating degree and viscosity, etc. So the CPP with different indexes has varieties of usages and should be used under the specialized engineer’s instruction. The common method is: Dissolve the product into the toluene or other solvents to prepare a solution of 20~30%. Then add the solution into the ink or other relevant products based on the ink formulation.

Technical requirements

Items

Binder

Ink

Paint

Binder-1

Binder-2

Ink-1

Ink -2

Paint -1

Paint -2

Paint -3

Paint -4

Chlorine (Cl,%)

25-30

30-40

29-32

32-35

18-30

30-40

40-50

50-65

Viscosity

(25°C,mPa.s)

500-1500

300-1000

200-500

200-500

100min

Photic test

0.06 min

PH value

5.5-7.0

Fineness µ m

60 min

Notes: 1).Viscosity value is measured in 20% toluene solution at 25°C by a rotary viscometer with speed of 750 r/min.

      2). Upon the request of the customers, chlorine content and viscosity can be controlled in a range of 1% and ±50 mPa.s, respectively.

Packing

The product should be packed into a fiberboard box lined with an internal polyethylene bag. Net weight of each piece is 20 kg.

Storage and transportation

The product is easy to absorb moisture and noninflammable. It should be stored in a dry and ventilated place. In general case, it should not be stored and transported together with other products.

cpp for ink

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.