The adhesive resin is modified and functioned PE produced by reactive extrusion. MyapTM have strong bonding to nylon, ethylene-vinyl alcohol copolymer, poly(ethylene terephthalate), and good compatibilization with polyethylene and polypropylene. MyapTM series of PE, PP and EVA with over 10 grades, which can be processed by general polymer extrusion or co-extrusion facilities, meet high performance adhesion needs for a variety of multilayer structure products.MyapTM is used in the fields as follows:1, High quality bags for food, chemicals, medicine;2, Containers for foods such as milk, pickled vegetables, seasonings and Containers for fuels;3, Bottles for medicine, cooking oil, fuel and makeup.4, multilayer layer films and other multilayer structures.

MyapTM 500 is a maleic anhydride functionalized polypropylene produced by reactive extrusion.

ApplicationsBonding layer for PP/PA or PP/EVOH multilayer structures.

Typical Properties

Property                  Typical Value       Unit               Test Method

Melting Point                167              ºC              DSCMelt Index                   0.7~25           g/10min              ASTM D1238(190ºC, 2.16kg)Density                      0.90             g/cm3                ASTM D792MAH Graft Level              0.5-1.5          wt%                  FIIR(Q/NZG01-2002)Tensile Strength at Break    14~22            MPa                  ASTMD-638Elongation at Break          750~950          %                    ASTMD-638  Vicat Softening Point        123              ºC              DSC

Basic Resin:polypropylene

AppearanceWhite or pallid particle

Adhesive Resins for PA/PE, EVOH/PE composite materials