Welcome to ECVERY
FSE FKM Pre-compound BDF25CP
FSE FKM Pre-compound BDF25CP
Supplier Info
[China Supplier]
Contact Person : Ms. he Blanninna
Tel : 86-28-85730628
Fax : 86-28-85730469
Product Detail
Fluoroelastomer is white and semi-tranparent elastomer and it is odorless, nontoxic, non-flammable.

BDF25CP

 BODA Fluoroelastomer BDF25CP   
 Technical Data Sheet  

CHENGDU CHENGUANG FLUORO-SLIICONE ELASTOMER CO., LTD

   

BDF25CP is a low viscosity curative incorporated fluoroelastomer copolymer.

 

BDF25CP is a general purpose grade, well suited for application where good flowability and processing property are required. It can be compounded to meet the major fluoroelastomer specifications.

 

BDF25CP can be used for compression molding of general purposes. It can be mixed using typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. Finished goods can be produced by a variety of rubber processing methods. Basic characteristics of the polymer are as follows:

Properties

Typical Values

Fluorine Content, %

66

Specific Gravity

1.80

Color

White

Solubility

LMW Ketones and esters

Mooney Viscosity ML

25

Typical Properties of BDF25CP

Test Compound

Polymer

100

MT Black (N990)

phr

30

MgO

Phr

3

Ca(OH)2

phr

6

Curing Condition

Press

10min at 170C

Oven

24h at 230C

Typical Rheological Properties

Monsanto Moving Die Rheometer (MDR2000®)

100cpm, 0.5°Arc, 6 minutes, 177C

 

 

ML, Minimum Torque

N m

0.25

ts2, Time to 2 inch-lb rise from minimum

50

t90, Time to 90% cure

135

MH, Maximum Torque

N m

1.80

Typcial Physical Properties

Press Cure 10 minutes @ 170C

Post Cure 24 hours @ 230C

 

 

 

 

Tensile (ASTM D412)

Mpa

13.0

Elongation at break (ASTM D412)

%

180

Hardness (ASTM D2240)

Shore A

78

Compression Set, [ASTM D395 Method B (Disc)]

Aged 70 hours @ 200C

%

18

Because conditions of product use are outside s control and vary widely, User must evaluate and determine whether a Boda product will be suitable for users intended application before using it.

 

The following is made in lieu in all express and implied warranties (including warranties of merchantability and fitness for a particular purpose): If a Boda product is proved to be defective, Bodas only obligation, and users only remedy, will be, at Bodas option, to replace the quantity of product shown to be defective when user received it or to refund users purchase price. In no event will Boda be liable for any direct, indirect, special, incidental, or consequential loss or damage, regardless of legal theory, such as breach of warranty or contract, negligence, or strict liability.

 

 

 

 

OVERVIEW OF FACTORY      

 

 

 

 CERTIFICATES OF FSE

 

 

 

 

 

 

PROCESSING MANAGEMENT                    

 

 

 

 

 

 INSPECTION PROCESS

FSE FKM Pre-compound BDF25CP

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.