Welcome to ECVERY
HT-401 Synthetic Resin Adhesive for automatic flap disc machine
HT-401 Synthetic Resin Adhesive for automatic flap disc machine
Supplier Info
[China Supplier]
Contact Person : Mr. wang bo
Tel : 86-21-39870516
Fax : 86-21-39870056
Product Detail
1.quickly solidify, 2.high final bonding strength, 3.good ageing resistance, 4.low amount of spraying,etc

Technical characteristics of Synthetic Resin Adhesive

1. Should be poured the adhensive rapidly.

2. After pouring the glue ,Colloidal will spread fast , and the probability of emery cloth fall down is low.

3. High resin solid content , solidifying material has high bonding, high heat resistance and good toughness.

 

Performance index  

 

                             Iterm

Data

Test methods

 

Viscosity mpa·s80°C

9000-150000

 

GB/T2794

 

Ohms(Ω)·cm

>5.0×1012

 

Coated 170°C solity 2h

 

 Shearing strength in normal temperature ( mpa)

>12.0

 

GB/T7124

 

200°C Shearing strength (mpa)

>2.0

 

GJB444

 

non-volatile matter

>99%

 

GB/T2703

 

Data of rewind in normal temperature

>21000

 

 

Method of use

1. Before use the  Synthetic Resin Adhesive need preheated  in ( 50-60 ) °C  for 60min, after installed on the machine the Synthetic Resin Adhesive temperature is 45-50°C.

2. After assemble the flap disc  should be put into  the oven with the temperature up to 130°C and heat preservation for 2h-3h . 

 

Packing

Colloidal packing 25kg per barrel, or can also be based on customers demand using non-standard packaging.

 

Safety

Colloid belongs to low toxic chemicals, should avoid entering eyes, oral.

 

Storage and packaging

1. Below 25°C storage, relative temperature under the condition of <70%, 6 months shelf-life, over shelf life after composite lattice can continue to use.

2. This product is not dangerous goods, according to the transport of chemicals in general.

 

Notes

The above performance data for the product to a temperature of 70%, temperature 25°Ctest of typical data, only to provide customers with the reference, and can not be fully guaranteed in a specific environment can achieve all the requirements, please customers use, based on the measured data.

 

About us

     We are a company specialized in producing a full range of various types of flap discs ,flexible flap disc  flap wheels with shafts  and other abrasive tools,Meanwhile ,we also produce the Synthetic Resin Adhesive and the fully automatic flap disc machine .The One conponent H-401 Synthetic Resin Adhesive is used for the flap disc made by the automatic machine . It is no doubt we have the most advance technology and the most equipments.

      if you are interested in our fully automatic flap disc machine ,  Synthetic Resin Adhesive and  abrasive tools, please feel free to contact me .I believe we are your best choice.

 

 

....

HT-401 Synthetic Resin Adhesive for automatic flap disc machine

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.