Laminator for processing orders up to B2 sheet format Automatic sheet feeding via our designed feeding head

Basic configuration:

Automatic feeder with fixed lifting tableSingle action  feeding headAutomatic sheet overlap controlLaminating cylinder heated by infrared heaterRubber counter pressure cylinderAutomatic sheet separation using built-in perforatorFixed unloading tableOptions:Film slitterAdditional perforatorPUR pressure cylinderDecurling roll (instead of decurling bar)Jogging tableAutomatic Amiga built-in stackerEmbossing modificationEmbossing moduleExternal stacking frameFilm loading equipmentPallet and film loading equipmentCombined loading/unloading equipmentPreventive Maintenance Spare Parts KitTechnical description:Feeding section:Automatic sheet feeding using  designed feeding head for accurate single sheet feedingSystem of guiding plates strengthens thin paper before lamination → helps against wrinklingSheet misfeed sensor → protects against film sticking to the pressure cylinderLamination section:Smooth film unwinding using mechanical brake; a distribution roll prevents folds on the filmThe laminating cylinder is fast dry heated (no heating liquid)Advanced regulation of the laminating temperature → precise temperature control, no film overheatingThe sheet overlap is electronically adjustable even during the machine run → easy to operate and precise solutionKey operation parameters are entered via a touch screen → fast and comfortablePressure cylinder thrust is pneumatically adjustable on both sides → strong and precise pressure systemForced air cooling of counter pressure cylinder → to be used with digital printsSnapping and stacking section:Adjustable decurling bar for straightening sheets after lamination → to ensure flat outputOptional decurling roll (instead of decurling bar) to prevent scratches on sensitive duplex printed digital outputSeparation of sheets carried out by snapping roll with help of film perforator and a skewing wheel → reliable and silent sheet separationPerforator is located behind the pull roll (built-in solution) → prevents sheet bursting on decurling barTechnical specifications:

Maximum designed lamination speed	20 m/min
Minimum sheet dimensions	20 × 20 cm
Maximum sheet dimensions	52 × 74 cm
Maximum stack height	48 cm
Maximum feeding table load	230 kg
Paper weight	115-350 gm²
Laminating film thickness	24-45 μm
Laminating film type	OPP, PET, Nylon
Laminating roll heat up time (25-100 °C)	Approximately 15 minutes
Recommended laminating temperature	135°C (depending on film type)
Sheet overlap accuracy	±2 mm (at constant lamination speed)
Machine dimensions, including the unloading table (L × W × H)	242 × 117 × 157 cm
Machine dimensions, including the stacker (L × W × H)	245 × 117 × 157 cm
Required input	3.8 kVA, 3 × NPE 400 V AC, 50 Hz
Air connection parameters	Minimum 6 bar, 130 l/min
Maximum pressure force	22.5 kN
Maximum linear nip pressure	43 N/mm

Automatic thermal film laminating machine for 500mm*700mm