This machine is composed of automatic feeder, cleaner, gluing section,drying chamber, laminating section, slitting section and automatic stacker.And it can work with water-based, solvent-based glue and pre-coated film.
1.High-speed sheet feeding machine:Automatic pre-stack feeding with Pre-stack feeding table and non-stop device, high precision on paper feeding, and the front and rear errors and left and right errors are not larger than 2mm ; 2. Electric heating/brushwheel brush and electric heating powder removing devices, with an environment-friendly filter, The reversal wheel brush design ensures the powder removing,in order to prevent paper from being deviated,the machine adopts an intensive powerful air suction platform.3.Gluing and pressing principal machine (with thin paper rolling): The machine has ceramic roller gluing, Hot roller and pressure roller adopts hot-water constant temperature ,Pressure roller and membrance laminated roller are both automatically controlled, air suction is performed in the whole sheet transfer process, the tension of the film is automatically controlled. Light-box belt has energe-saving devices.Glue is controlled by the gap between ceramics roller attached with blade and gluing roller to keep glue uniform. Film and glue are pneumatically controlled.4. Finished product breaking:The paper drawing machine has a thin paper unfolding function and a six-blade structure, and guide wheel draws paper without film edge; With thin paper receiving device,105g and the following paper(including 105g) shall not directly slitting,need the rewinder device to receive.5.Collecting machine: (with auxiliary paper receiver station)Collecting machine to shoot three pneumatic paper,collect the papers neatly,with pressure wave structure with rapid product operation.