1.Expert in xlpe power cable for 21 years 2.Competitive Price with Good Quality 3.Standards:GB/T12706 , IEC60502, ,BS 5467

1.Brief Introduction :

    Cu/XLPE/SWA/PVC sheath Electric power cable are for laying buildings,inducts , kin tunnels,direct in ground and under water,.

For laying indoors , in tunnels, in ducts. Able to bear extermal mechanical force but not large pulling forces. Single core cables are impermissible to be laid in magnetic ducts.

2.operating characteristics:

Rated power-frequency voltage u0/u:0.6/1 KV

Max permissible continuous operating temperature of conductor 70

Max short-circuit temperature of the conductor shall not exceed (Max 5 seconds duration): cross-section of conductor 300 mm2

      The anbient temperature under installations should not be below 0

      The bending radius of single core cable should not be less than 20 times of the cable diameter ,the bending radius of multi-core cable should not be less than 15 times of the cable diameter

3.Specification :Cores and Nominal Cross Section Area:

1 core (mm2)	2 core (mm2)	3 core (mm2)	3 core + 1 core (mm2)	4 core (mm2)	3 core+ 2 core (mm2)	4 core + 1 core (mm2)	5 core (mm2)
1×4	2×4	3×4	3×4+1×2.5	4×4	3×4+2×1.5	4×4+1×2.5	5×2.5
1×6	2×6	3×6	3×6+1×4	4×6	3×6+2×4	4×6+1×4	5×4
1×10	2×10	3×10	3×10+1×6	4×10	3×10+2×6	4×10+1×6	5×6
1×16	2×16	3×16	3×16+1×10	4×16	3×16+2×10	4×16+1×10	5×10
1×25	2×25	3×25	3×25+1×16	4×25	3×25+2×16	4×25+1×16	5×16
1×35	2×35	3×35	3×35+1×16	4×35	3×35+2×16	4×35+1×16	5×25
1×50	2×50	3×50	3×50+1×25	4×50	3×50+2×25	4×50+1×25	5×35
1×70	2×70	3×70	3×70+1×35	4×70	3×70+2×35	4×70+1×35	5×50
1×95	2×95	3×95	3×95+1×50	4×95	3×95+2×50	4×95+1×50	5×70
1×120	2×120	3×120	3×120+1×70	4×120	3×120+2×70	4×120+1×70	5×95
1×150	2×150	3×150	3×150+1×70	4×150	3×150+2×70	4×150+1×70
1×185	2×185	3×185	3×185+1×95	4×185	3×185+2×95	4×185+1×95
1×240		3×240	3×240+1×120	4×240	3×240+2×120	4×240+1×120
1×300		3×300	3×300+1×150	4×300	3×300+2×150

5 core power cable xlpe power cable