AAC Conductor 1.Material:Aluminium; 2.Standard:BS215,BS EN50182, DIN 48201,ASTM B231.

AAC (All Aluminium Conductors)ASC (Aluminium Stranded Conductors)

1 DescriptionBare concentric-lay-stranded aluminium wires constructed with a straight round central aluminum wire surrounded by one or more layers of helically laid aluminium wires. The most commonly used stranding consists of 7, 19, 37, 61 and 91 wires.In all constructions, the successive layers shall have opposite directions of lay, the outermost layer being right-handed.

2 ApplicationUsed in overhead electric power transmission and distribution lines with various grade voltages.The most favoured overhead bare homogeneous conductors for primary and secondary distribution lines with relatively short spans where high mechanical strength is not required.

3 Manufacturing StandardsGB/T 1179-2008, IEC 61089, EN 50182, DIN 48201 Part 5, BS 215 Part 1, ASTM B231 or as required.

Technical Characteristics Based on Standard DIN 48201 / DIN EN50182
Code number	Area	Number of wires	Wire     diameter	Conductor diameter	Linear mass	Rated strength	D.C. resistance at 20oC
	mm2	No.	mm	mm	kg/km	kN	Ω/km
16	15.9	7	1.7	5.1	43.4	3.02	1.7986
25	24.2	7	2.1	6.3	66.3	4.36	1.1787
35	34.4	7	2.5	7.5	93.9	6.01	0.8317
50	49.5	7	3	9	135.2	8.41	0.5776
50	48.3	19	1.8	9	132.9	8.94	0.5944
70	65.8	19	2.1	10.5	180.9	11.85	0.4367
95	93.3	19	2.5	12.5	256.3	16.32	0.3081
120	117	19	2.8	14	321.5	19.89	0.2456
150	147.1	37	2.25	15.8	405.7	26.48	0.196
185	181.6	37	2.5	17.5	500.9	31.78	0.1588
240	242.5	61	2.25	20.3	671.1	43.66	0.1193
300	299.4	61	2.5	22.5	828.5	52.4	0.0966

Technical Characteristics Based on Standard BS 215-1
Code name	Nominal aluminium area	Stranding and wire     diameter	Sectional area	Approx. overall diameter	Approx. mass	Calculated D.C. resistance at 20oC	Calculated breaking load
	mm2	No./mm	mm2	mm	kg/km	Ω/km	kN
MIDGE	22	7/2.06	23.33	6.18	64	1.227	3.99
ANT	50	7/3.10	52.83	9.3	145	0.5419	8.28
FLY	60	7/3.40	63.55	10.2	174	0.4505	9.9
WASP	100	7/4.39	106	13.17	290	0.2702	16
HORNET	150	19/3.25	157.6	16.25	434	0.1825	25.7
CHAFER	200	19/3.78	213.2	18.9	587	0.1349	32.4
COCKROACH	250	19/4.22	265.7	21.1	731	0.1083	40.4
BUTTERFLY	300	19/4.65	322.7	23.25	888	0.08916	48.75

Technical Characteristics Based on Standard ASTM B231
Code Words	Size	Area	Number of wires	Wire     diameter	Conductor diameter	Linear mass	Rated strength	Calculated D.C. resistance at 20oC
	AWG or kcmil	mm2	No.	mm	mm	kg/km	kN	Ω/km
Oxlip	4/0	107.2	7	4.42	13.26	295.2	17	0.268
Tulip	336.4	170.5	19	3.38	16.9	469.5	27.3	0.1688
Cosmos	477	241.7	19	4.02	20.1	664.8	37	0.1194
Orchid	636	322.3	37	3.33	23.31	886.9	50.4	0.0895
Arbutus	795	102.8	37	3.72	26.04	1109	61.8	0.0717

AAC Conductor(All Aluminium Conductor)