Welcome to ECVERY
ARMORED POWER CABLE
ARMORED POWER CABLE
Supplier Info
[China Supplier]
Contact Person : Mr. CUI DANNY
Tel : 86-371-67837547
Fax : 86-371-67837545
Product Detail
ARMORED POWER CABLE COPPER OR ALUMINIUM CONDUCTOR/ XLPE INSULATION/ARMOURED OR UN ARMORED/PVC OR PE SHEATHED CABLE

THE ARMOURED POWER CABLE

 

1. STANDARDS

THE PRODUCTS ARE MAINLY COMPLYING WITH IEC 60502 STANDARD,  ALSO CAN BE PRODUCED ACCORDING TO OEM REQUIREMENTS AND OTHER STANDARDS, SUCH AS BS STANDARD, DIN STANDARD, ASTM STANDARD, ETC.

 

2. VOLTAGE GRADE

2.1 LOW  VOLTAGE  CABLE

LOW VOLTAGE (0.6/1 KV) SINGLE CORE OR MULTI-CORE/ COPPER OR ALUMINIUM CONDUCTOR/ PVC INUSULATION/ STEEL TAPE ARMORED OR GALVANIZED STEEL WIRE ARMORED OR UNARMORED/ PVC OUTER SHEATH POWER CABLE.

 

2.2 MEDIUM VOLTAGE CABEL

VOLTAGE GRADE IS UP TO 35KV, CROSS-SECTION AREA CAN BE UP TO 1000 SQMM  (COPPER OR ALUMINIUN CONDUCTOR). CONDUCTOR LONG-TIME  OPERATING TEMPERATURE IS 90 DEGREES. IN SHORT CIRCUIT, CONDUCTOR  HIGHEST TEMPERATURE SHOULD BE NOT MORE THAN 250 DEGREES.

1KV-35 KV MULTI-CORES/ COPPER OR ALUMINIUM CONDUCTOR/ XLPE INSULATION / COPPER TAPE OR COPPER WIRE SCREEN / GALVANIZED STEEL WIRE ARMORED /  PVC OR PE SHEATH / POWER CABLE,

 

2.3 HIGH VOLTAGE CABLE

HIGH VOLTAGE (35KV~220KV)  COPPER OR ALUMINIUM CONDUCTOR/ XLPE INSULATION/ METAL SHEATH (LEAD OR CORRUGATED ALUMINIUM)/ HDPE OR PVC OUTER SHEATH POWER CABLE.

LAYING CONDITIONS: FOR LYAING  UNDER GROUND WITH LARGE DIFFERENT  ALTITUDE, BE ABLE TO BEAR EXTERNAL MACHANICAL FORCE AND MODERATE PULLING FORCE.

 

3. CABLE'S CHARACTERISTIC:

3.1 LONG TIME OPERATING TEMPERATURE FOR CABLE CONDUCTOR IS 90 DEGREES.

3.2 THE HIGHEST TEMPERATURE OF THE CONDUCTOR IN SHORT CIRCUIT (NO LONGER THAN 5 SECONDS) IN NOT MORE THAN 250 DEGREES, IF A JOINT IS IN THE CABLE, THE TEMPERATURE OF THE TINNING WELDING JOINT IS NOT MORE THAN 120 DEGREES, COMPRESSING JOINT NOT MORE THAN 150 DEGREES AND ELECTRO-WELDING JOINT NOT MORE THAN 250 DEGREES.

3.3 NO DROP IN LIMITED PROVIDED THERE IS FULL MECHANICAL TENTION WHEN CABLE IS LAID. IT SI FORBIDDEN TO LAY CABLE IN IRON-PIPE OR TO FIX CABLE BY CIRCLING AROUND THE CABLE WITH IRON MATERIALS.

3.4 BEING LAID, THE MINIMUM TEMPERATURE OF THE CABLE SHALL NOT BE LOWER THAN ZERO DEGREE. IN THE CASE OF LOWER TEMPERATURE, HEATING MEASURES SHALL BE TAKEN.

 

THE OEM AND CUSTOMIZED PRODUCTS WILL ALSO BE WELCOMED!

ARMORED POWER CABLE

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.