FRP cross arm

Production process:  FRP cross arm is manufactured by high-strength fiberglass as reinforcing material, thermosetting resin as the base, and then taken shape on a special pultruded mold, where the high temperature activates the resin to cure.

Features:  light weight and high strength, anti-ageing, aesthetically pleasing appearance, corrosion-resistance, easily maintain, ,insulating capacity, environmental friendliness, UV Resistant Inhibited .

A new material used in urban and rural power grids.

   The advantages of the product:

        1. Bending across laminas                            ≥340Mpa

        2. Impact strength along laminas(in transformer oil, 90±2oC)        ≥33KJ/m2

        3. Electric strength across laminas(in transformer oil, 90±2oC)     ≥14.2MV/m

        4. Withstand voltage along laminas(in transformer oil, 90±2oC)     ≥35KV

        5. Dielectric constant                                                                 ≤5.5

        6. Dielectric loss factor                                                               ≤0.04

        7. Insulation resistance after immersion in water                           ≥5*108Ω

        8. Water absorption                                                                      18mg

        9. Color                                                                                    at the Resin

      Note: The diameter and length according to customers' order.

FRP pultrusion cross arm