10kV Power transimission line insulator use in electrical transmission line.
Features:
1) End fittings are crimped onto fiberglass rod with voice-operated displacement type crimper
2) The connection location between end fittings & rods is fused with sheds housing by the overall high temperature vulcanized silicone rubber injection molding as it could minimize the interface.
Materials:
1) Silicon Rubber housing
2) ECR fiberglass reinforced epoxy resin rod Electromechanical
Specifications:
1).Rating voltage: 10kV
2).Specialized mechanical bending load:100kN
3).Structure height: 400±5 mm
4).Min arcing distance: 228mm
5).Min creepage distance: 630mm
6).Lightning impulse voltage: 110kV
7).Power frequency wet withstand voltage: 40kV
10kV Power Transmission Line polymer Insulator