With the help of high-speed calculation & logic judgement of computer, JKW intelligent controller can realize the intelligence.

JKW Series intelligent controller adopts SCM with high performance as the basic hardware and special control program structure manufactured with ten-year experience. With the help of high-speed calculation and logic judgement of  computer, the controller can realize the intelligence. 

Function Characteristic1. Adopt AC sampling technology 2. Math integral, filter the wave, no sensitive to harmonic wave3. The reactive power as the control physical quantity, high control accuracy, without switching vibration.4. The control parameter is operated by math, it is convenient to operate, the data of power failure doesnt lose. 5. Adopt the control scheme which can find the superior one automatically, reduce the switching times, improve the system service life. 6. With strong anti- interference, it can resist the 2000V inference impulse inputted from the power supply, it cant lose the data until machine is dead, and it is available to run.  7. The digits display the power factor of power network, reactive power, voltage, current ( primary side) and control parameter. 8. It has manual running mode and automatic running mode, so it is convenient for customers installing and debugging.9. It indicates the over voltage and under voltage clearly, owns the obvious function of cutting capacitor bank rapidly, it prevents capacitorbank running under the over voltage. 10. With optional locking function of switching vibration (It is stated when user orders). 11.  The single capacitor has the optional functions for delaying 200s from switching in to switching off, it has full discharging time after the  capacitor bank being switched off, it can reduce the impact to power network from capacitor. (It is stated when user orders).12. When the input resistance of current sampling signal is less than 0.55Ω, it can be withdrawn from the measuring circuit.13. With the selection function of full automatic mode and manual setting mode 14. The product manual provides a lot of removing methods for faults, so user can install and debug.

Technial data:

1.       Basic Parameter:

Rated voltage: AC380/AC220+-10%

Rated current: AC 0-5A

Rated frequency: 50Hz+-5%

2.       Control Parameter:

Sensitivity:100mA

Target COSΦ Preset:0.85-0.99

Step length:0.01

Factory reset:0.95

Input and cutoff lime delay: static state 1-250s;

Over-voltage protection:380-500V/230-260V;Step length1V;Return difference6V;

Under-voltage protection: 340V/180V; Return difference 6v; CT variation 50/5A-3000/5A;Step length 1;Factory preset 500/5A;

Capacitance capacity:dynamic state output of each branch DC12Vx50Ma static state output of each branch 380Vx7A/200Vx5A;

Measuring accuracy:

Voltage +-1.0%;Current+-1.0%;Power factor-1.0%;Reactive power+-2.0%;

Size mounting hole:

JKW8A mounting hole size: 113x113mm.

JKWL Series intelligent controller