1.Used in Transmission 2.Certificate&Standard:CCC CTQC ISO9001 ISO140001 IEC726 3.Oil-immersed 4.5 years warran

1/ basic parameters

Type: D9

Voltage combination:

6KV/0.4KV ;6.3KV/0.4KV; 6.6KV/0.4KV; 10KV/0.4KV; 10.5KV/0.4KV; 11 KV/ 0.4KV;20KV/0.4KV;23KV/0.4KV;33KV/0.4KV;35KV/0.4KV

Tapping ±5% OR ±2*2.5%

Conncc-tiojjosymbol: D/Yn11 OR Yyn0

2/ the use of the environment

Device types: outdoor type

Normal environment conditions of use: the elevation not more than 1000 m

Environmental highest temperature + 40°C, minimum-25°C

The special environment conditions of use: elevation of more than 1000 m

Environmental highest temperature + 40°C, minimum-45°C. (when you order details)

Mounting ambicnt: no corrosive gas, no obvious dirt environment

 3/ carries out the standard

1. GB1094.1 ~ 2-1996 power transformer

2. GB1094.3, 5-2003 power transformer

3. GB/T6451-2008 oil-immersed three-phases transformer power technical parameters and requirements

4.IEC

 4/ performance characteristics

1, D9-M series power transformer core USES the high quality cold-rolled steel coil, USES the high quality anaerobic copper into and beautiful outlook, safety of operation. D9 series D7 series transformer and compared, and the annual average no-load loss is reduced by 10% and the average load loss is reduced by 20% and save energy obviously, widely used in industry and agriculture, urban and rural power grid.

2. High reliability, performance level advanced, economical index is reasonable.

3. The core of the level 3 juncture when, surface coating cured paint, in order to reduce loss and noise.

4. Winding new structure, reasonable design oil way, adopt new insulation structure, improve mechanical strength and resistance to short

  

Single-phase Oil-immersed distribution Transformer