EX pusn button box

Main technical data:

Ex mark: Ex edCT6     DIP A21 TA,T6 Intended use: Can be used in zone 1 and zone 2                      Can be used in zone 21 and zone 22 Ambient temperature use: -40≤Ta≤55 Degree of protection: IP65 Rated voltage: Max 380V Rated current: Max 16A Installing arrangement: The center with pitch is 4060mm Material of enclosure: Glass fibre reinforced polyester (SMC) of static resistance

        Full plastic explosion-proof control box: the enclosure is made of glass fiber reinforced polyester of static resistance. All the metal parts are anti-corrosive. The Concave-convex joint is designed between the cover and the body to mount an airfoam silicone bar, which secure degree of protection IP65.

        Individual enclosures can be combined into large units to order. The components with standard pitch are 40 mm. Selecting the enclosure depending on the number of components mounted. These built-in front type components are mounted the 35mm mounting rails directly. The railed anchor points on the components and grooves on the mounting rails secure that the component are mounted in the accurate positions. The cable entry can be set on the top, bottom, left, or right side. The cable gland is plastic moulded or aluminum. Pipe thread designed for the aluminum cable gland would be wired with a steel tube or a flexible conduit.

EX pusn button box