Ads by Google
Absorb mode parameter | |
Input channel | single channel |
Dynamic range | >40dB |
Measure mode | Manual, Auto(Recommend) |
Frequency range | 2-2000MHz, 2-3000MHz |
Amplitude range | 40dBm,+5dBm -10dBm,+35dBm (30dB) 0dBm,+45dBm (40dB) |
Resolution | 0.01dB |
Measure precision | +-0.3dB |
Input signal | GSM, CDMA, PHS and so on |
Input impedance | 50Ohm |
Through mode parameter | |
Frequency range | 800-2500MHz |
Amplitude range | +13dBm--+53dBm |
50Ohm standing -wave ratio in reference | <1.1 |
Insert wastage | <0.4dB |
Input impedance | 50Ohm |
Probe wave | <1.2 |
Others | |
Display screen | TFT LCD(320*240) |
Battery | 7.2V lithium battery |
Work time | average>24 hours ,series>12 hours |
Power adapter | 100-240V/0.8A 50-60Hz |
Charge time | about 5 hours |
Volume | 240 (L)100*(W)50*(H)mm |
Weight | 0.7 kilograms |
Storage temperature | -10--+40?FONT> |
Storage environment | put in dry condition |
Display interface
Calibration parameters of frequency range in communication used frequently are considered when designed, which makes your work simply.
Legible display interface makes us read the result easier
You can change the frequency if necessary
RF Power Meter??3G- RF POWER METER??Name | Model | Describe |
Portable Power Meter | RY-R2(2~2000MHz) | Power range: -45dBm--+15dBm Auto measureManual calibration, accuracy is ??.2dB;Internal rechargeable battery, last for 12 hoursExternal power sensor, make the measure easierOptional attenuator can make high power measureTable model fit laboratory environments use |
Portable Power Meter | RY-R3 (2~3000MHz) | |
Table Model Power Meter | RY-R3T (2~3000MHz) | |
Through Mode Power Meter | RY-R1000(800~2500MHz) | Make power and standing wave measurementPower range: 25mW~200W. |
RY-R3000 RF Power Meter (2~3000MHz)