prefab house Main material list as following
1.Material: Grade Q235, or equivalent to ASTM A36.
Grade Q345, equivalent to ASTM A572.
2.Wall: 50mm/75mm thick EPS/Rockwool/PU sandwich panel
3.Roof: 50mm/75mm thick EPS/Rockwool/PU corrugated sandwich panel
4.Window: UPVC or Aluminum sliding window
5.Door: Aluminum frame with panel same as wall panel
6.Welding: Single level butt welding, fillet welding by electric arc welding, and Gas shielded welding.
7. Surface treatment: Hot dip Galvanized, powder coated, baking varnish, Zinc primer, Red primer
A, Hot dip galvanize
1), standard: JIS, DIN, ASTM B695-2000
2), Hot dip galvanizing hole cutting good looking on surface of
Galvanizing process:
Galvanizedpre-treatment→Hot-dip→ Galvanizedend → make smooth → Deburring →Finished product
inspection.
B, paint
1), Primer paint one coat 20-40 um
2), middle paint two coat 40-60 um
3), finish paint one coat 60-80 um
Paint Type: 1), red primer
2), zinc primer
3), Alkyd primer
8, Packing: steel channel bundles and load in container
9, Workshop pre-install for Check the product
modular homes prefab house