Ads by Google
Bimetal thermometer Manometer is widely used in petroleum,petrochamical,power,pharmaceutical,chamical engineering industry.Compared to the glass thermometer,it is more convenient and inexpensive.And it can read the figure on spot.
Case: Zinc plated steel
Bezel: Stainless Steel
Window: Glass
Bulb: Copper alloy, adjustable at end
Pocket: Brass, friction at axial of thermometer case, fixing by screw for option
Pocket length including thread: 75, 100, 150, 63, 100, 150,200,250,300,400,500,800,1000,1200,1500,2000mm
Connection: 1/2”BSP center back
Temperature sensor: bimetal coil
Range: -80+40 deg C, -40+80 deg C, 0-50 deg C, 0-100 deg C, high temperature up to 500 deg C for option in Stainless Steel bulb and pocket for option
Accuracy: —1.0%to +1.0%,—1.5% to +1.5%
Thermal response time equal or lower than 40s
Protection material 1Cr18Ni9Ti
Work temperature -20 to 60 deg C
Relative humility lower than 85%
Electric contact capacity 10VA (max electric current 1A,max voltage 22V)
An impressive technical specification and wide range of
standard features make the SUPASAFE the obvious choice
for a wide range of process and engineering applications.
Primarily designed for the harshest of offshore Oil & Gas
environments. SUPASAFE provides a very cost effective
solution to the process industry and therefore is the ideal
‘standard’ choice for companies looking to benefit from a
stock and range rationalisation.
Meeting all the current National and International specifications
and regulatory standards including EN 837, PED etc.
SUPASAFE with its inherently safety pattern construction
incorporates many features as standard that are designed to
provide full protection to the instrument and the operator.
1. Size Dial
100 mm (4") & 150mm (6") White Anodised Aluminium marked in black finish
Single or dual scale
2. Mounting
Direct, Surface and Flush Pointer
Stainless steel coloured black
3. Case & Bezel Options: Micrometer Adjustable
Rugged one-piece full Safety Pattern case to S3 standard
with a solid baffle partition wall and full blow out back
4. Movement
manufactured in 1.6mm thick, 316L stainless steel. Stainless Steel Construction
Option : Viscous Damped movement to overcome the effects
5. Scale Ranges of minor pressure pulsations
0 to 600 mbar to 0 to 1400 bar Pressure
Equivalent units of pressure / vacuum available Window
Single and dual scales are available 3mm Laminated Safety Glass (Standard)
Option: Acrylic Plastic Window
6. Pressure Element
≤80 Bar – 316L Stainless Steel Bourdon Tube Environmental
7. Rating
≥81 Bar - 316L Stainless Steel Coil IP67 as defined in EN 60 529
8. Overload Traceability
Units withstands overload pressure up to 130% of FSD All instruments are individually calibrated and have an unique
Overload & vacuum stops are fitted on the movement Serial Number printed on the dial. A Certificate of Conformity
Traceable to National Standards is Supplied Free of Charge
Option: Mechanical overload clamps fitted internally to
enable units to withstand up to 3x the max scale reading
9. Certification available
BS EN 10204 3.1B Material Certification
10. Pressure Connection in 316 Stainless Steel Point by Point Test Certificate
3/8, 1/2 BSP
1/2 NPT Safety
Other connections available, contact our Sales Dept for details All units are manufactured to comply with EN 837-1, S3
specification and other regulatory standards including PED.
11. Accuracy Class
CL:1 1.0% of FSD as defined in EN837-1 Installation
12. instructions
Option: 0.5% of FSD as defined in EN837-1 Refer to EN 837-2
13. Temperature Temperature Effect
Operating: -20 to +90 ºC Variation in indication caused by temperature shall not exceed
Storage: -40 up to +100 ºC ± 0.04 x (t2 – t1)% of the span where:
Bimetal Thermomanometer