Electronic Pressure Control
Electronic Pressure Control |
The Electronic Controller orders the automatic start and stop of the water pump when opening or closing any tap or valve of the system. The controller can keep constant pressure and water flow in the system as long as any tap in the system is open during the pumps operation. | Voltage: | 220 - 240V / 50Hz | Maximum Current: | 10 Amp | Restarting Pressure: | 1.5 Bar or 2.2 Bar | Maximum working Pressure: | 10 Bar | Connection: | 1" / 25mm | Protection Rating: | IP 65 | Maximum Temperature Rating: | 60°C | Manual Start Switch | RESET | Tension LED | POWER | Pump Working LED | ON | Security System LED | FAILURE | Special Non Return Valve to avoid surges | Security System removing the possibility of the machine working without water |
|
|
Electronic Pressure Control