This series is a low differential pressure sensor switch which combined high level analog output and switch output at the same instrument after précised calibration. Switch point can be adjusted at the trimmer on the back side of the sensor. And the indicator shows the status of the switch. The switch output can be PNP or NPN type.
Application:
Textile MachineryTobacco MachineryEnergy management SystemVentilation management for Mining SystemSpecification (at 25)
Pressure range: | ±1psi to 0-150psi |
Non-linearity: | <±0.25%FS |
Media compatibility: | dry air |
Proof pressure: | 2 times |
Long term stability: | < ±0.2%FS/year |
Responsible time: | 1mS |
Electrical:
Supply voltage: | 12 to 30 VDC |
Analog Output: | 0.5-4.5V, 1-5V, 4-20mA |
Switch output: | NPN, PNP |
Zero offset: | <±0.5%FS |
Span tolerance: | <±0.5%FS |
Environmental Performance:
Operation temperature: | -40 to 85 |
Compensated temp: | 0 to 70°C |
Electrical connection: | Circular connector with M12x1 thread |
Temperature error: | <0.04%FS/ (within compensation range) |
Mechanical connection: | Female 1/8 BSP (or customize) |
SDK differential pressure sensor switch