Ads by Google
Acrylic Fabric Transfer Printing Ink (ZHONGLIQI)
Sublimation Transfer Characteristics:
High transfer rate.
Excellent color reproduction, gorgeous color, not color cast.
Applicable to synthetic fabrics such as polyester fabric, smooth feel comfortable, no hard feeling.
Transferred pattern scratch-resistant, washable, non-cracking, no peeling, no fading, and good weather resistance.
1.Use PrincipleIt it used on all kinds of offset machine. With the ink,first print image on paper, then transfer the image onto various materials by heat transfer press, especially for polyester fabric. Under high temperature, the ink will become gas and go into fabric.2.Use ScopeOffset (one color, two color and four color machines)3.Use Method(1)Be able to adapt to the demand for middle-speed or high-speed printing.(2)During the normal condition, use the ink on the machine directly.4.The printing process just needs 3 steps(1)Print the image on paper, and normal paper is ok.(2)Put the printed paper on substrate, such as polyester and nylon fabric.(3)Put the paper and fabric on the heat-transfer machine. When the temperature reaches 180-220°C, the image will be transfer printed from paper onto the substrate.5.Suitable FabricsPolyester fabric, Triacetate fabric, Nylon fabric, Acrylic fabric, Polypropylene nitrile. (for any kinds of synthetic fabrics).6.Transfer PaperCoated paper, offset paper,chrome paper and calendered paper.Transfer paper should be 80-90 gr/m2 with dimensional stability.7.ColorsMagenta,Yellow,Cyan,Black.8.Advantage(1)Good stability on the machine,clear dot reproduction,excellent ink-water balance.(2)Be able to adapt to the demand for middle-speed or high-speed printing.(3)During the normal condition, use the ink on the machine directly.9.Transfer temparatureAbout 185~220°C10.Transfer timeAbout 20~40 secondsThe following is the transfer printing parameters for your reference
Name of fabric | Transfer temperature | pressure | Time |
Polyester fabric | 205°C~220°C | 0.5kg/cm2 | 10~30 seconds |
Polyester deformation fabric low elastic | 195°C~205°C | 0.5kg/cm2 | 30 seconds |
Triacetate fabrics | 190°C~200°C | 0.5kg/cm2 | 30~40 seconds |
Nylon fabric | 195°C~205°C | 0.5kg/cm2 | 30~40 seconds |
Acrylic fabric | 200°C~210°C | 0.5kg/cm2 | 30 seconds |
Two acetate fiber fabric | 185°C | 0.5kg/cm2 | 15~20 seconds |
Polypropylene nitrile | 190°C~220°C | 0.5kg/cm2 | 10~15 seconds |
Dye degree:(European Standard)
Color fastness | ||||
Color | Magenta(HPA604) | Yellow(HPA204) | Blue(HPA404) | Black(HPA804) |
Rank | 5-6 | 6 | 4 | 4 |
Please be noted
The control of the colors is always carried out after the transfer of the final supports.The relationship between the temperature and the time of contact is important in order to havethe optimal color resistance and ink penetration (the longer the time of transfer, the better the ink penetration of the fabric).
Packing1kg/tin,12kg/carton.carton inside,wooden outside.
Our Company
Our Certificates
Our Packing
Our Sublimation Ink transferred into fabric
Acrylic Fabric Transfer Printing Ink (ZHONGLIQI)