1.dual 31 band graphic equalizer 2.Good quality,hottest sale in the markets 3.EQ/LIMITER

KOTV  professional dual 31 band graphic equalizer    

Features

Switchable Boost/Cut range between ±6dB and ±15dBElectronically balanced/unbalanced inputsServo balanced/unbalanced outputsRF filtered inputs and outputsXLR, Barrier Strip, and 1/4 inch TRS connectors-12dB/+12dB input gain range18dB/octave 40Hz Bessel low-cut filterChassis/signal ground lift capabilityInternal power supply transformerPower off hardwire relay bypass with 2 second power up delay

Inputs

Connectors: 1/4 inch TRS, fenals XLR (pin 2 hot), and barrier terminal stripType: Electronically balanced/unbalanced, RF filteredMaximum Input Level: >+21dBu balanced or unbalancedCMRR: >40dB, typically >55dB at 1kHz

Outputs

Connectors: 1/4 inch TRS, male XLR (pin 2 hot), and barrier terminal stripType: Impedance-balanced/unbalanced, RF filteredImpedance: Balanced 200 ohms, unbalanced 100 OhmsMaximum Output Level: >+21dBU balanced/unbalanced into 2kOhms or greater>+18dBm balanced/unbalanced (into 600 ohms)

System Performance

Bandwidth: 20Hz to 20kHz, +0.5/-1dBFrequency Response: <10Hz to >50kHz, +0.5/-3dBDynamic Range:

+/-15dB Range: 109dB  +-6dB Range: 115dB

Signal-to-noise Ratio:

+/-15dB Range: 90dB  +-6dB Range: 97dB

THD+Noise: <0.005%

Interchannel Crosstalk: <-80dB, 20Hz to 20kHz

Function Switches

EQ Bypass: Bypasses the graphic equalizer section in the signal pathLow Cut (recessed): Activates the 40Hz 18dB/octave Bessel high-pass filterRance (recessed): Selects either +/-6dB to +/-15dB slider boosy/cut range

Indicators

Output Level: 4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and 18dBuEQ Bypass: 1 LED: redClip: 1 LED: redLow Cut: 1 LED: red+/-6dB: 1 LED: yellow+/-15dB: 1 LED: red

Power Supply

Operating Voltage: 100VAC 50/60Hz, 120VAC 60Hz, 230VAC 50/60HzPower Consumption: 24 wattsMains Connection: IEC receptacle 

KOTV 1231 professional dual 31 band graphic equalizer