Ads by Google
Introduction:
Anti-static PE bag is made through the below molding of LDPE, LLDPE, anti-static additive, color pigment, stable ingredient and is then heat, sealed and cut into bag form, It has all common characteristics of PE as well as anti-static function. Its material is soft, and thickness can be adjusted freely. It is widely used in general electronic products like printed circuit board . As an outer package, it can not only lower the cost of but also protect electronic products from damage by static generated by mutual friction of the insulators. This anti-static bag is the best packaging material for PCB, which makes the static electricity generated on the PCB to be released to avoid damage.
The release time is just about 2 seconds According to the requirement of customers, it can be made into sheet material, coiled material , flat open bag, and envelope bag. The color can also be customized.
Technical data:
Test Item | American Society for Testing Material | Test standard | Unit | Test result |
Melt Item | D1238 | GB3682 | g/10min | 2.1 |
Water absorption rate | D570 | GB/96-04-10 | % | 0.5 |
Density | / | GB1033 | g/cm | 0.92 |
Tensile strength | GB/96-04-10 | MPa | 32.01 33.75 | |
Breaking elongation rate | GB/96-04-10 | % | 1200 685 | |
Friction coefficient | GB/96-04-10 | Us Ud | 0.09 0.08 | |
Static electricity dissipation | 5000~0v | SJ/T10694-1996 | Second | <2 |
Appearance | / | GB/96-04-10 | ||
Size | / | GB/96-04-10 | mm | ±10% ±3;±3cm |
clear transparent anti-static ziplock plastic bag