Horizontal split casing pump The inlet and the outlet of the pump are under the axis and their centerline is perpendicular .

PERFORMANCE RANGE

Capacity Q                                    108~10800m2/h

Head      H                                     8.5~140m

CONSTRUCTION

The inlet and the outlet of the pump are under the axis and their centerline is perpendicular to the axis.It is unnecessary to disturb the inlet piping, the outlet piping and the motor while inspection.The main parts of the pump consist of casing,pump cover, impeller,shaft, shaft sleeve and double suction wearing ring, etc. Impeller,shaft sleeve and doublesuction wearing ring are consumable parts.The impeller is fixed on the shaft with the shaft sleeves and the sleeve nuts. Its axial displacement will be adjusted by the sleeve nut. The thrust of the impeller will be balanced with the help of symmetric vanes.The doublesuction wearing ring is to reduce leakage from pressure water house to suction house.The shaft seal is either packing seal or mechanical seal. The bearing lubricated oil has dryoil and dilute oil. When the inlet diameter of the pump is less than 800mm,the bearing gets lubricated with dryoil.When the inlet diameter is more than 800mm,the bearing gets lubricated with dilute oil.

The pump is connected with the motor through flexible coupling.

THE DIRECTION OF TOTATION

The rotation of the pump rotor is clockwise looking from the driver to the pump,i.e.the injet is on the right and the outlet is on the left.It is also counter clockwise according to customers's requirement. 

Single-stage double-suction centrifugal pump with horizontal split casing