1.Capacity:1.6~400m3/h 2.Heat:5~125m 3.Temp:0~150C 4.Height of up-draft:less than 5m 5.Structure:single-stage single-priming

Summary    ZH series temperature - resistant and corrode - resistant self - priming chemical centrifugal pump is researched and manufactured by our company which is a single - stage and single - suction self - priming chemical centrifugal pump, combined with similar products in domestic and overseas. This kind of pump can be used for the mediums of less than 35 % content of less than 3mm solid, with transferred temperature between 0 °C and 150 °C .The performance scope for the pump :flow:1.6 ~ 400m3/h, lift: 5 ~ 125m, height of up - draft: less than 5m.According to the various transferred mediums, the materials for the touching liquid part of ZH series self - priming chemical centrifugal pump can be selected to use cast steel, 304, 305, 316, 316L and others to manufacture.

 

Model signification

  

Structure descriptions    ZH series temperature - resistant and corrode - resistant self - priming chemical centrifugal pump is consisted of pump body, impeller, pump cover, shaft, bracket, mechanical seal, sleeve, and other parts. See the structure diagram for ZH series self - priming chemical centrifugal pump.This kind of pump has a good self - priming effect that can realize "One time drainage, life - long self - priming".    ZH series self - priming chemical centrifugal pump has a thickened and high stiffness pump shaft and three pieces of imported bearings, which can be running stable and without noise. The combined mechanical seal matched cooling equipments can prolong the service life.The rotary direction of pump is inverted rotary from the end of suction inlet.

Structural drawing of ZH series self-priming pump

 ,

1.pump body         2.impeller nut        3.impeller              4.pump cover         5.static ring seat

6.sealing box         7.skeleton oil seal   8.shaft                   9.bearing cover      10.bracket

11.bearing             12.grease nipple            13.mechanical sealing dynamic ring

14.mechanical sealing static ring   15.spring   16.cooling nozzle       17.sleeve

Order information

In the selection of this series o pumps, users must explain the situation of transport medium, including the media names, specific gravity, viscosity, temperature, corrosion and particle content.Special requirements, such as toxic, flammable, explosive or other dangerous situations, to notice advanced.

Temperature-resistant and corrosion-resistant chemical centrifugal pump