This peripheral pump is desgined to pump clean and non-aggeressive liquid with temperature up to 60 degrees,high pressure

PS series pumps are a good solution for self-priming.and also it is with peripheral impeller and gains high presures relative and its curves are steep particularly.the wide range of PS series is particularly suitable for domestic applications and automatic distribution of water from surge tanks.watering gardends ans for boosting insufficient mains water pressure,reliable,economic and simple to use

these pumps should be installed in a covered area,protected against the weather

 OPERATING CONDITIONS

Liquid temperature up to 60oC;

Ambient temperature up to 40oC;

Continuous duty. 

MOTOR

Single phase/Three-phase,50Hz/60Hz

Insulation Class130

Protection IP44

With thermal overload protection

Copper winding 

Model	Power		Q.max L/min	H.max m	Suct.max m	Speed r.p.m	Pump dia
	HP	KW					Inler/outlet
PS-126	0.33	0.25	35	28	9	2850	1”*1“
AUPS-126	0.33	0.25	35	28			1”*1“

PS-126 self-priming water pump