CNK High Temperature series Canned Motor Pump Bore: 32-200 Capacity: 1.0-600m3/h Head: Max.150m Speed: 2900r/min

CNK High Temperature series Canned Motor Pump

Bore: 32-200Capacity: 1.0-600m3/hHead: Max.150mSpeed: 2900r/minOperating Temperature: +100~+360°CPressure rating: 1.6Mpa and 2.5MpaViscosity: Max. 100mm2/S

The medium is delivered through the suction chamber into the impeller and then through this to the discharge nozzle. A thermal barrier avoids the direct heat transfer from the pump to the motor part. The motor heat loss is dissipated by a secondary cooling-/lubricating circuit via a separate heat exchanger. This cooling-/lubricating circuit also supplies the slide bearings. Thus the fluids at temperature up to +400 °Ccan be delivered on the discharge side while the secondary cooling cycle is at low temperature level. This construction is also suitable for conveying polluted liquids or liquids charged with solids, if necessary, pure process liquid needs to be dosed into the motor circuit.

Application Sector

For the delivery of hot organic heat transfer oil, as well as heat bath liquids. These models can also be used for aggressive, toxic, explosive, precious, inflammable, radioactive and slightly volatile fluids.

Canned Motor Pump