Ads by Google
horizontal centrifugal wear-resisting and anti-wear sand pump
Products Parameters:
Caliber: φ25~φ400mm
Capacity: 12~5040m³/h
Head: 5~90m
Products overview:
cantilever ,horizontal centrifugal slurry pump , suitable for metallurgy ,mining ,coal , electric power , building materials, and other industrial departments to transport strong corrosive ,high concentration of slag pulp .this type pump can dual multistage series use
Products advantage:
Quick - wear parts has a long life
High efficiency and low power consumption
Easy to maintenance
Structure characteristics:
1: Adopts horizontal, vertical axis medium open type double pump shell structure, lining for cemented carbide or rubber has good wear-resisting, corrosion resistance and high reliability
2: High efficiency hard alloy, and low NPSH
3: to meet the different operation conditions, adopted the brief type structure bearing parts, selected high bearing capacity design, alloy bearing grease lubrication oil.
4: through adjusting the clearance between protection board and impeller, ensuring the pump efficient operation
5: using packing seal, impeller sealing , container type mechanical seal to adapt to different operating mode requirement
6: Pump and drive can choose straight league transmission, triangle, hydraulic transmission device coupled transmission, reducer drive
7: the outflow direction can be installed by eight Angle rotation to adapt to different site installation conditions
8: available to use multipole series, to satisfy the long-distance transmission requirements
Slurry pump features and uses slurry pump for the cantilever, double-hull suction horizontal centrifugal slurry pumps. The pump outlet position can be based on demand at 45 degrees intervals, rotating installation of eight different angles. Head in a small area of low flow, high abrasive slurry can be transported; in areas of high lift and large flow of light abrasive slurry delivery. Used in metallurgy, mining, coal, electricity, building materials, transportation and other industrial sectors strong abrasive, high concentration slurry, the type of multi-stage pump can also be used in tandem.
pumps have replaceable wear-resistant pump metal liner, impeller wear corrosion resistant metal or rubber. pump liner and impeller pump using only wear metal. pump for conveying the small particle size, no sharp corners high concentration of slurry particles, but also can transport corrosive slurry.pump seal packing seal can be used, vice impeller seals, packing plus auxiliary impeller seals, mechanical seals and other types. The transmission pattern are: DC Direct drive, CR parallel to the belt drive, ZVZ top and bottom belt drive, CV and other types of vertical belt drive.
Type | Outlet Diameter (mm) | IntelDiameter (mm) | Capacity (m³/h) | Head (m) | Speed (r/min) | Allowable mating MAX. Power(KW) | NPSH (m) |
25HS-B | 25mm (1”) | (1.5”) | 12.6~28.8 | 6~68 | 1200~3800 | 15 | 2-4 |
25HHS-C | 25mm (1”) | (1.5”) | 16.2~34.2 | 25~92 | 1400~2200 | 30 | 2-5.5 |
40HS-B | 40mm(1.5”) | (2”) | 32.4~72 | 6~58 | 1200~3200 | 15 | 3.5-8 |
50HS-C | 50mm (2”) | (3”) | 39.6~86.4 | 12~64 | 1300~2700 | 30 | 4-6 |
50HHS-D | 50mm (2”) | (3”) | 68.4~136.8 | 25~87 | 850~1400 | 60 | 3-7.5 |
horizontal centrifugal wear-resisting and anti-wear sand pump