Welcome to ECVERY
air Feeder, for punch press work (R + E type magnetic valve)
air Feeder, for punch press work (R + E type magnetic valve)
Supplier Info
[China Supplier]
Contact Person : Mr. Wang Cary
Tel : 86-0769-87931901
Fax : 86-0769-87931903
Product Detail
air feeder, for punch press work (R + E type electro magnetic valve )

Air feeder, for punch press work (with R + E type magnetic valve)

Models available: AF-1C to AF-11C

Max feeding width.mm:  50 to 450

Max feeding length.mm: 50 to 450

Material thickness max.mm: 0.5 to 3

Air pressure: kg/cm2: 4.5

Max feeding S.P.M: c/mim: 200 to 25 

Features:

1.Standard model: suitable for plastic and metal strip, with feeding width & length from 50mm to 450mm and thickness 0.1-3.2mm.

2.Standard model equipped with E OR R type electro magnetic valve

(1): E-type magnetic valve, adopted if the press stroke were shorter or longer to feed material.

(2): R-type Release magnetic valve - to release the fixed clamp, adopted when the stroke of slide is too short or too long in punching the die & when high precision feeding is needed.

3.Standard model + E AND R type magnetic valve, adopt when the press stroke were shorter or longer to feed, the fixed clamp should be released for correcting the tolerance of feeding, and high precision feeding is required.

4.The slideways on models over AF-7C adopt round guide for maximum wear resistance and adding straightness accuracy.

air Feeder, for punch press work (R + E type magnetic valve)

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.