YR27-6000 8000T Sheet rapid formeing hydraulic press |
Use and features |
The machine is mainly used for forming large sheet shell such as titanium, stainless steel and heat exchanger platen, etc. It also can be used for forming large cover parts. The machine is design by the structure of pre-tension wire wound type which ensures reliable operation, small dimension and light weight. It has independent electric control system and hydraulic system. The electric system is controlled by PLC program. It has centralized button-control system with manual and semiauto work modes for selection. Work pressure and speed of work feed can be adjusted.
This series of machines have a pressure display, temperature display, alarm counting display device and pressure holding time setting device, etc. Its performance in stability, pressure keeping, delay time accuracy and automation is at the highest standard. The machine is also equipped with quick mould-changing device. It can be connected to YS26-450 plate punching hydraulic press to form a plate production line of heat exchanger. |
Main parameters | Unite | Value | ||
Nominal force | KN | 60000 | 80000 | |
Liquid pressure | MPa | 94.3 | 80 | |
Slide stroke | mm | 350 | 150 | |
Speed of slide | Quick down | mm/s | 100 | 50 |
Work feed | mm/s | 0.4-1.5 | 0.2-0.5 | |
Return | mm/s | 100 | 50 | |
Max. sealing height | mm | 800 | 550 | |
Min. sealing height | mm | 450 | 400 | |
Effective area of work table(length X width) | mm | 2300X1400 | 2300X1600 | |
Motor power | KW | 90 | 45 | |
Outline size of main machine | mm | 3350X2100X6600 | 1600X3340X5540 | |
Machine weight | T | 120 | 138 | |
Maximum load weight of slide track for hydraulic lifting mould (four bar) | T | 12 |
| |
Track length for hydraulic lifting mould | mm | 1400 |
| |
Up stroke of slide track for hydraulic lifting mould | mm | 3 |
| |
Work table height from floor | mm | 800 |
|
YR27-8000T heat exchanger plate forming hydraulic press