1.Size:608x608x243mm 2.Payload:580g 3.Battery: 3S 2200Mah Lipo 4.Radio: 2.4G 6channel 5.Camera mount with servo

RC model Q4

1. 580g payload2. Height altimeter and stabilizer system3. 2.4G 6ch radio4. Camera mount5. FPV with camera

Quadcopter Basic Components and Functions:a) The quad copter Quadcopter is a high precision four-rotor aircraft designed forstable recreational flight and aerial photography.b) The aircraft arrives fully built and flight tested. However, to ship it to you the landinggear and Paddle s had to be dismantled - a 15 minute reassembly job.c) To get this unit flying, you will need your RC Gear (at least 4 Channel Receiver)and 3s1p LiPo battery (2200mAh).d) Lift is achieved using four high efficiency 12-inch Paddle s with direct drive low KVbrushless motor. Maximum lifting efficiency of 12g per Watt.e) The quad copter utilizes a high-performance MEMS sensor for 6 DOF stabilizationwith low drift. Altitude hold is achieved via an integrated barometric sensor.f) T he quad copter can take off and land vertically, hover, altitude hold, fly left, right,forward and back with ease.g) Upgrading this basic quadcopter for aerial photography is easy via plug-n-playcamera mount and stabilization system. Check our website to purchase theseupgrade.

Machine size	608 × 608 × 243	mm	±3mm
largest Expand size	885 × 885 × 243	mm
Motor Wheelbase	Diagonal line,the two motor centers wheelbase	580mm	±3mm
Propeller	1260,positive and negative special propeller	12”
Battery	LiPo 3S 2200mAh 20C	1P
product Weight	No battery, receiver,              no load	730g	±10g
Take-off                   weight	3S 2200mAh 1P  Battery, receiver,  PTZ	950g	standard

FAQ

RC model Q4