solar dynamo radio with torch
Document No. | HY-088 | Prepared by | : | |||||||
Title | HY-088 PRODUCT SPECIFCATION | Approved by | : | |||||||
Page 2 of 2 | Revision: A | Date: MAR.25.2009 | ||||||||
|
|
|
|
| ||||||
Type of Instruction | Quality Production | Doc Control Stock | Calibration Maintenance | Training Purchase | _______ _______ | |||||
B: LED Lighting 2. Working voltage: 3.2V--4.2V 3. Working current <=60mA 4. Max power consumption:0.21W 5. LED lifetime: 100000 hours 6. Lighting : >5 hours @ 3LED ( 300mAh battery full charged) 7. 1 minute of hand winding ( >=130 rpm) supports: over 30 Minutes of Continuous Light (<=100lux); C: Radio 1. Turn the volume dial clockwise to turn the radio on and control volume. 2. Select AM or FM with radio band. For better reception, extend the radio antenna. 3. Turn tuner dial to select station. The green tune indicator light will come on when the station selected is fully engaged. 4. AM 530~1610KHz FM 76~96MHz SW1(3-10MHZ) radio : >350minutes ( 300mAh battery full charged, VOL midterm) 1 minute of hand winding ( >=130 rpm) supports: over 20 Minutes of working 5. speaker: 0.4W, 8Ω 6. Max power consumption:0.25W 7. Working current <=70mA 8. Working voltage: 2.9V--4.2V D: charging the mobile phone Lift the rubber tab on the back of the unit and find the USB port.connect the USB cable from the USB port to mobile phone Turning the hand crank(>130r/minute), the red power indicator illuminates when charging. Max charging current: 450±50mAOutput voltage: DC 5.3VE: overcharge & overdischarge protection Charge: connect the mini USB port to the computer or the AC/DC adapter with the charging USB cable, the red LED indicator illuminate. when the green indicator illuminates,the battery is charged full.Discharge: the protect circuit starts working when the voltage is below 2.7V.the LED will be flashing if the lighting switch is on, the sound will be distortion if the radio is on power.
|
solar gift dynamo radio with torch