parallel board

Main power connectors: Deans.

              Balance plug:jst-xh(align types)

Input power connector :  4.0 mm bullet connectors with 12awg.

   the parallel board is designed and produced by China KenSun hobbies,if you are interested in our product,please contact me.We are looking forward to your reply. We are providing professional services to ensure a smooth cooperation. it's used for simultaneously charging multiple lithium batteries(including LiPo, LiFe, and Li-ion types) in parallel.

1.Convenient to charge and balance up to six lithium batteries at the same time when using with a balance charger. The capacity, discharge rate, and voltage of batteries can be different in a reasonable range. 2.When compared to charge a single battery, this method can achieve a better balance result,and the voltage difference is smaller. The charging time is significantly reduced since all batteries are balanced at the same time instead of balancing batteries one by one.3.This method can significantly accelerate battery charging speed. Taking six 2.2 Ah LiPo batteries as an example,  if the pack is charged one by one at 1C rate (2.2A), typically it will take around six hours. When using the parallel charging board to charge all the packs at the same time, the charge rate can be set to 13.2 A (2.2x6=13.2A), and it will take only one hour for the packs to be fully charged and balanced. The charging rate of every individual is still 2.2A (13.2/6 = 2.2A), therefore there is no harm to the safety and longevity of every battery.4.The product is made of high quality parts and built with fine workmanship. All the metal parts of power connectors are plated with 7u gold, and all the cables are made of soft silicon wires. The product, from PCB to circuit, has been tested in various unfriendly environment to ensure quality and reliability.

 According to the  types of battery balance connectors , we are providing four different versions:

According to the types of battery power connectors, we are providing some different versions. We can also manufacture various products with different connectors according to customers' requests.

  3.The input power connector can be 4.0 mm bullet connectors for easy connection to a charger.We can make proper revisions according to your  requirements.

These are part of our existing models. All the cables and all the connections and so on can accordance with your demand to production.

parallel board jst-xh/deans