Ads by Google
First, the characteristics and uses ZL series for DC power rectifier electromagnetic brake and clutch electromagnetic DC-specific products, which is converted into AC power will be able to meet the DC or direct current electromagnetic brake electromagnetic clutch DC power needs. Factory production line ZL power rectifier complete specifications, the applicability of the strong, stable, durable. ZL series rectifier power supply wiring from the form of Lead-and-two post; from the end brought the number of leads and have a four-terminal-side lead to six (six-end leads to facilitate contact with external contactors); from the speed of action There are fast-general and two (of which was divided into fast-rapid pull-in, quick release and pull-in is fast and quick release of three); from the input and output voltage, there 220V AC voltage input, 99V DC output voltage and 380V AC input voltage, 170V DC output voltage of two. This product can achieve output current 2A, to meet the basic kinds of electromagnetic brake and DC-DC electromagnetic clutch. ZL series with a small power rectifier, a good seal for motor YEJ standard working environment can be installed directly in the electric wiring inside the box; with the input and output protection circuits for devices such as brakes, and other high-frequency inductors at work. Second, ZL Series Model Rectifier power and meaning:
Third, the use of attention: 1, according to the DC electromagnetic brake (clutch) of direct current voltage choose the right specifications of the power rectifier. 2, AC input voltage power line must be rectified if the 380V AC voltage from 220V AC input voltage power rectifier Rectifier's power will result in serious damage to the contrary would have the power rectifier does not work. 3, AC input voltage fluctuation permitted in the rating of -15% to +5%. 4, wiring must be standardized, reliable connections must be strong, post-not thread ends are connected Maotou, exposed some of the not more than 2 millimeters, it will not allow the skin to insert wire connection to the hole; Lead-wire connection, interconnection The difference between the two wires cross-section not too large joints must be wrapped with insulation adhesive plaster for a more moist places to be wrapped with yellow wax. 5, ZL rectifier power supply system of electronic products, are not allowed to use Zhaoou table (table shake) or other high-pressure testing equipment to detect the insulation case.
motor rectifier