Product Intrduction:
ZR-OLR mechanical oil leval regulator operate a floating valve and control the oil level from compressor crankcase. The oil level setup is 1/2 of sight-glass position , if it is lower than this position , floating operation valve will open from oil receiver where the oil supply , when the oil level arrive the position which is set to ZR-OLR mechanical oil level regulators, valve will closed supply oil automatically to make sure the compressor not lack of oil and operation nomally.
Features:
1.Controls the oil level in the compressor crankcase with a float operated valve;2.Keep the oil level at the compressor manufacturer's recommended level;3.Applicable to all compressors;4.Surface corrosion resistant static electrical painting procedure protecting the shell from the rust;5.maximum work pressure:3.1Mpa(450 Psig).
Design Functions:
1.SAE connector(45#);
2.End cover(ST12);
3.Oil concentrator(Q235);
4.Filter shell(Q235);
5.Needle valve(20#);
6.Floating ball(ST12);
7.Flange plate(A3).
Specification:
Type | Oil Level | Hole Site |
ZR-OLR-4 | 1/2 | 4 |
ZR-OLR-4 Oil Level Regulator