aluminum evaporator suitable in a wide range of refrigeration industry. high quality,reasonable price.

aluminum evaporator

specification:3.0Rows×10.0Holes

Air cooled evaporator

 

1.material :copper , aluminum ,galvanized plate

2.aluminum foil: hydrophilic or bare

3.fin type: louver or flat fin and corrugated or slit fin.

4.copper pipe: diameter 7mm or 8mmor 9.52mm ,etc ,grooved or smooth tube

5.side plate: galvanized plate or aluminum plate

6.size: from1/6HP to 20HP

7.available temperature is above minus 40 centigrade degree

8.prodcut length: up to 4 meters max

9.pitch of holes and pitch of rows : 25*21.65MM and 12.7*19.05MM

10.did gas examination under 3.0Mpa air pressure to ensure the tightness.

11.widely used in refrigeration industry, cold room and other system.

12.we can supply products as per customized samples or drawing.

13.producing procedure: tube bending, punching fin, expanding, digressing, drying

Welding, leakage test, bending, inspection, packing

Note: for further information please contact us.

aluminum evaporator