Detailed Product Description
- Fin punched with flanging height 1.5mm, toroidal contact with aluminum tube, greatly increased heat exchange area.- The al tube bended completely without any joint,then pulling the al-tube inside the fins by mould, more tight contact.-With tube expansion system adopted, more tight contact between fins & tubes, heat exchange efficiency increased 40~60%- Fin pitches can be free engineered as per cooling request- Japan imported full automatic cleaning machine, super cleanness for R134a refrigerant
-Besides the evaporator main body without any brazing points, it highly reduces and avoids the risk of leakage.
Application: No-Frost Fin Evaporator is applied to different types of single door, double doors and multi-doors no-frost refrigerators. It is also can be used as evaporator or condenser for other refrigeration equipment.
Material: - Al pipe (O.D8~10mm) X (Wall thickness 0.7~1.0mm)- Fin: fin stock aluminum foil, thickness is 0.13~0.25mm- Inlet & outlet tube: Al-Copper tube- Fin specification: L60*W27, L52*W27, holes distance 25mm- Product length: 270~500mmStructure:- Straight pipe type: needs the support bracket - Inclined pipe type: no needs support bracket, which can further save cost.
Remarks:- Outlet position be engineered by client- Its ASS’Y with heater & accumulator available.- Fin type 1 no needs heater; Fin type 2 needs heater-Client’s own drawing available to develop
Fin type evaporator